Timberboard Nuts

Order cut-to-size solid walnut timber board online

Easily order cut-to-size solid walnut timber boards online. This way, you can create a robust and sturdy piece of furniture in your interior in no time at all. You can have our solid timber panels cut into various shapes and finishes. Whether you need an industrial table or want to add some warmth to your home with solid wall shelves, anything is possible. How handy is that?

Solid walnut timber board: what is it?

Walnut is a hardwood species. If you treat the wood well, it will last for years. Walnut has a grey-brown to red-brown colour that discolours over time when exposed to daylight. A beautiful dark or black grain pattern is also present on the sheet material. The wire can vary between straight, tangled and wavy, which gives the wood a special structure. It is also known as walnut wood. This board material is one of the popular wood species in our country and has a warm appearance which is often used in furniture and interior construction. Mainly for making furniture and parquet. Walnut is quite stable when it comes to warping and shrinking, but still be careful in rooms with medium to high humidity and temperature differences. A Walnut sheet is also called a Walnut furniture board or timber board, although it is not finished at the sheet edges as standard.

Quality grading with timber board

Timber board comes in different qualities. This does not mean that the sheet is more or less strong, it indicates the quality of the appearance of the sheet. The quality can be found in the product properties. More information about the visual grading below.

The solid walnut boards in our range are of high quality. This can be deduced from the visual grading. The visual grading is indicated by letters, often a combination of two letters with a separator between them. This can be found in the product name or the product properties. The first letter represents the top of the sheet, the second for the bottom or backside. A/B thus describes the top and bottom of the sheet. A is the best visual grading.

Read here more about the quality of timberboards.

The solid sheet material is made up of slats. Slats are small wooden planks made entirely of pure wood. To be able to make a sheet of a larger size, several slats are combined into one large sheet. This results in a very solid and strong sheet. Keep in mind that no slat has the same appearance. The wood structure and colour of each slat is unique and can therefore also deviate from the image. Our solid sheets are interior bonded, which means that the material can only be used indoors.

The direction of the wood grain

Timber board has a visible wood grain. The wood grain pattern always runs in the longitudinal direction. When sawing the sheet, we maintain that the longitudinal dimension is also the longitudinal direction of the wood grain. So be careful when filling in the measurements, so that the flames of the wood grain all run in the right direction!

Available thicknesses of solid walnut timber board

Solid timber boards can be ordered in various thicknesses. You can easily specify your desired thickness during the ordering process. This way you can be sure that the sheet material meets your requirements: both the size and thickness of the material. The following thicknesses are available: 26 mm and 40 mm.

Machining solid walnut timber board

Walnut is easy to machine. First sand the sheet with a fine grain (at least 180) so that the original colour of the wood appears. It can be sawn and milled just fine, there are no additional instructions for this other than that your material has to be properly sharp for an optimal result. Pre-drilling is recommended, but not required. Use stainless steel instead of iron when bonding with metal to prevent discolouration of the wood.

Because it is a softer wood species, and is sensitive to discolouration, so we recommend finishing this wood type well. Finish the sheet with lacquer, varnish, stain or oil to properly bring out the natural look. It also reduces the risk of warping and shrinking. 

Specific applications of solid walnut timber board

Walnut can be used to make furniture such as dressers or cabinets. Walnut can also be used as furniture, such as tables and chairs. Keep in mind that walnut is a softer hardwood species. This makes it easy to machine, but also more sensitive and less impact resistant.

In addition to sawing the material to size with millimetre accuracy, you can also choose from a variety of shapes and finishes. For example, if you have a round dining table in mind, choose the 'circle' shape, or opt for a rectangle with rounded corners. See the available shapes and finishes that apply to the product or see all the possibilities on the shapes or finishes page.

Alternatives to solid walnut timber board

Is Walnut not the right type of wood for your project or are you looking for a solid variant with a somewhat Scandinavian look? Then opt for massief essen timmerpanelen or massief esdoorn timmerpanelen. View our other solid wood types here: